Thermal vacuum chamber TVC-110
Thermal vacuum chamber is designed to perform outgassing of objects, to manufacture honeycomb panels for spacecrafts (hereinafter referred to as S/C) and perform leak test of S/C modules.
Depending on application purpose, vacuum chambers can be of different shape (cylindric, spherical, box-shaped, D-shaped)to be used for vacuum storage and drying, to simulate space environment, for different scientific research as part of technological facilities, as well as for industrial purposes.
When so required by Customer, the company can propose electropolished chamber made from the off-gage seals and flanges with special coatings or paint.
Components:
-
Horizontal vacuum chamber for outgassing
-
Cover transfer device
-
Cover transfer control device
-
Vacuum pumping system
-
Depressurization system
-
Illumination system for scheduled maintenance
-
Technological table with the jig
-
Thermal flux imitator
-
Technological jig
-
Leak control system
Our experts will gladly answer your questions.
More than 100 one-of-the kind projects – Full-service cycle – Warranty for equipment produced
|
Operatingpressureatthegiventemperature of nitrogen cryogenic screens (-180 ±10)°C |
<1·10-6 mmHg |
|
Operatingpressureatthegiventemperature of nitrogen cryogenic screens +20 °C |
<1·10-5 mmHg |
|
Temperature of cryogenic screens |
-180 ±10 °C |
|
Total leakage |
Not to exceed 5 l·µmmHg/sec |
|
Thermal flux density |
Up to 1400 W/m² |
|
Continuous run time |
46 full days |
|
Material of the vacuum chamber |
12X18H10T |
|
Internal dimensions of the vacuum chamber: |
- width 4000 мм; |
Documents
